Equipment Parking
Code: ANCMF-AU-I-EP-01
AS/NZS 3733:1995
ISO 14001:2015
EN 13549:2001
ISSA CIMS-GB
NEN 2075
Industrial
Daily Cleaning
Standard Risk
ISO Compliant
Objective
To ensure the Equipment Parking area in industrial facilities is maintained to the highest cleaning standards, ensuring safety, hygiene, and compliance with Australian regulations.
Scope of Work
- Remove all debris and rubbish from the parking area.
- Sweep and mop the entire floor surface using appropriate cleaning solutions.
- Sanitise all high-touch surfaces, including door handles and control panels.
- Dust and wipe down all visible surfaces, including walls and equipment.
- Ensure all drains and water outlets are free from blockages and clean.
- Inspect and clean any signage for visibility and cleanliness.
- Use colour-coded cleaning systems to prevent cross-contamination.
Method
- Begin by removing all visible rubbish and debris, placing it in designated rubbish bins.
- Sweep the entire area to remove dust and loose dirt.
- Prepare a mop with a suitable industrial cleaning solution and mop the floor thoroughly.
- Use a sanitising spray on all high-touch surfaces and wipe with a clean cloth.
- Dust all surfaces using a microfibre cloth to capture fine particles.
- Check and clean all drains, ensuring they are free from obstructions.
- Inspect signage and clean with a damp cloth to maintain visibility.
Equipment
- Industrial broom and dustpan
- Microfibre cloths
- Mop and bucket with industrial cleaning solution
- Sanitising spray
- Colour-coded cleaning cloths
- Rubbish bins
- Personal protective equipment (PPE)
Quality Criteria
| Performance Level | Criteria |
|---|
| Excellent | No visible debris or dust; floors are spotless and dry; all surfaces are sanitised and free from smudges; drains are clear and odour-free; signage is clean and legible. |
| Good | Minor dust or debris in corners; floors are clean with minimal streaks; most surfaces are sanitised; drains are mostly clear; signage is mostly clean and legible. |
| Pass | Noticeable dust or debris; floors have visible streaks; some surfaces are not sanitised; drains have minor blockages; signage is somewhat legible. |
| Fail | Significant debris or dust; floors are dirty or wet; surfaces are unsanitised; drains are blocked; signage is illegible. |
Documentation
- Cleaning Checklist: Digital or paper checklist to verify completion of all cleaning tasks
- Incident Reports: Documentation of any cleaning-related incidents, spills, or issues encountered
- Maintenance Records: Record any maintenance needs identified during cleaning (for reporting to maintenance team)
- Photos: Before and after photos as requested to document cleaning completion and quality